Palworld Server Settings: Key Guide and 3 Presets

The Palworld server settings decide almost everything about how your world feels: how fast players level up, how easy it is to catch Pals, how brutal death is, and how heavy the server is on your hardware. Set them badly and a friendly co-op server becomes either a grind nobody enjoys or a world that is over in a weekend. Set them well and the same server stays fun for months. The catch is that Palworld hides most of its options in a single configuration file with a slightly unusual format, and a few well-known traps cost new admins hours.

This guide explains how the configuration file works, walks through the keys that matter most, gives you three presets you can copy as a starting point, and lists the mistakes we see repeatedly. Check the official documentation for the exact list of keys in your game version, because the game updates often and new options appear over time.

How Palworld server settings are stored

Palworld stores its server configuration in a file called PalWorldSettings.ini, inside the Pal/Saved/Config folder of your server. The subfolder name depends on the platform the server runs on. The file ships with almost nothing in it, and the full list of default values lives in a separate template called DefaultPalWorldSettings.ini. Editing the template does nothing by itself: the usual routine is to copy its contents into PalWorldSettings.ini and then change the values you want.

The format is the first surprise. Where many games list one setting per line, Palworld places nearly every option inside one long line that begins with OptionSettings=, wrapped in brackets, with each key and value separated by commas. That means a single missing comma, a stray space in the wrong place or a broken bracket can make the server ignore your whole file, so edit with care and keep a backup of the original.

On the Portallis panel you reach the file through the file manager. Stop the server first, because changes made while it is running can be overwritten when the server shuts down and saves its own state. Edit the file, save it, and then start the server again.

The Palworld server settings that matter most

The Palworld server settings include dozens of keys, and most servers only ever change a handful. The table below groups the ones that make the biggest difference to how the game feels. Values given as rates are multipliers, where 1.0 means the normal game and 2.0 means twice as much or twice as fast.

Key What it controls Notes
ExpRate Experience earned by players Rate multiplier, default 1.0
PalCaptureRate How easily Pals are caught Rate multiplier, default 1.0
PalSpawnNumRate How many Pals appear in the world Increases server load as it goes up
DayTimeSpeedRate Speed of the day phase Lower values make days last longer
NightTimeSpeedRate Speed of the night phase Lower values make nights last longer
DeathPenalty What a player loses when they die From nothing up to everything
CollectionDropRate Resources gathered from nodes Rate multiplier
EnemyDropItemRate Items dropped by enemies Rate multiplier
ServerPlayerMaxNum Maximum players connected Must match your RAM
BaseCampMaxNum and BaseCampWorkerMaxNum Number of bases and workers Large values add load
AutoSaveSpan How often the world is saved Shorter means safer but heavier
bIsPvP and related options Player versus player rules Boolean values, written True or False

Progression: experience, capture and drops

These Palworld server settings are the keys players feel most directly. ExpRate controls how quickly players level, and it is the setting most often pushed too high. A modest increase makes the early game less of a chore, but a very high value means players reach the late game in a few evenings and lose interest. PalCaptureRate and the drop rates control how generous the world feels. Raising them slightly is a good way to reduce frustration for a small group of friends, while leaving them at default keeps the game closer to what the developers designed.

Time: day and night speed

DayTimeSpeedRate and NightTimeSpeedRate let you stretch or shrink each phase. Many servers make nights shorter, because the dark is when a lot of players log off, and keep days at normal length. If your community likes the atmosphere of long nights, do the opposite. These two values have almost no effect on server performance, so change them freely to suit your players.

Death and PvP

DeathPenalty decides what a player loses when they die, from nothing at all to everything they carry. A relaxed server usually keeps items and equipment, while a hardcore server drops everything. The PvP options, written as boolean values, let you enable player-versus-player damage and related rules. Decide your rules before you open the server and publish them, because changing death or PvP rules later feels like a betrayal to players who built their strategy around the old ones.

Capacity: players, bases and workers

ServerPlayerMaxNum caps how many people can be connected at once, and it is a setting you should link directly to your RAM. Palworld is demanding, and every extra player means more Pals, more bases and more things for the server to simulate. The base and worker limits work the same way: they are fun to raise, and expensive to run. Increase them gradually and watch how the server behaves before you promise more to your players.

Three Palworld server settings presets to copy

A preset of Palworld server settings is a starting point, not a final answer. These three cover the most common kinds of server. Treat the values as suggestions based on how the game is usually played, change one group at a time, and talk to your players after a week.

Setting Relaxed co-op Balanced Hardcore
ExpRate 1.5 to 2.0 1.0 to 1.5 1.0
PalCaptureRate 1.5 1.0 1.0 or lower
CollectionDropRate 1.5 1.0 to 1.2 1.0
DeathPenalty Keep items and equipment Drop items Drop everything
PalSpawnNumRate 1.0 1.0 1.0 to 1.5
Night length Shorter nights Default Longer nights
Player count 4 to 10 10 to 20 10 to 32

For a group of about ten friends, the relaxed co-op column is a safe first choice: players progress at a comfortable pace, death is an annoyance rather than a disaster, and the server stays light because spawn rates are left alone. Move towards the balanced column once your players are comfortable with the game and ask for more of a challenge.

Passwords, admin access and security

Two of the Palworld server settings deserve attention before you tell anyone the address of your server. The server password keeps strangers out of a private world, and the admin password gives control over the server through in-game commands and remote tools. Never leave an admin password empty or easy to guess, and never share it in screenshots, Discord messages or support requests. If you enable the remote administration interface, treat it as a door into your server: use a strong password and make sure it is not exposed more widely than it needs to be.

It is also worth deciding early who gets administrator rights. A small group of trusted people is plenty, and each additional admin is another person whose account, if compromised, could damage the world. Keep a short written note of who has access, and remove it when someone leaves your community.

Performance: settings that make the server heavy

Some Palworld server settings change how the game feels, and others change how much work the server has to do. The ones that most often push a server into lag are the spawn rate, the number of bases and workers, and the number of players. Raising the spawn rate multiplies the number of Pals the server has to simulate everywhere in the world, which costs processing time even when no player is nearby. Large bases with many workers keep the server busy around the clock.

The practical rule for Palworld server settings is to give the server more headroom before you give players more toys. Palworld is memory-hungry, which is why our own plans for the game start at 6 GB, and the right size grows with the number of players and bases. A saving interval that is too short can also cause small, regular stutters, because the server pauses to write the world to disk. Pick a value that balances safety and smoothness, and schedule a regular automatic restart during your quietest hours so the server starts each day fresh. The panel’s scheduled tasks make that a few clicks.

One last tip on performance: when the server feels slow, resist the urge to change ten Palworld server settings at once. Lower one heavy value, such as the spawn rate or the worker limit, restart, and judge the result after a real play session. If lowering it makes a clear difference, you have found your bottleneck, and you can keep the fun settings untouched while you fix the expensive ones.

Mistakes that break Palworld server settings

The same handful of mistakes with Palworld server settings account for most of the support questions about this file. Knowing them in advance saves you an evening.

  • Editing while the server is running. The server writes its own state on shutdown and can erase your changes. Always stop the server first.
  • Editing the wrong file. The default template is not read by the server. Your changes must be in PalWorldSettings.ini.
  • Breaking the single line. A missing comma or bracket can make the server ignore the whole OptionSettings entry. Change one value at a time, and keep a backup.
  • Wrong value format. Booleans are written True or False, strings are quoted and numbers use a dot for decimals.
  • Forgetting the saved world options. Community guides report that once a world exists, some values are stored in the world’s own save data and read from there. If a change does not seem to apply, back up your world first and check the official documentation for how your game version handles this.
  • Pushing rates too high. A very high experience or drop multiplier ends the fun quickly.
  • Changing rules without warning. Tell your players before you change anything that affects progression or death.

How to apply and test your Palworld server settings

Apply changes to your Palworld server settings in a way you can undo. Stop the server, copy PalWorldSettings.ini somewhere safe, change a small group of related values, save, and restart. Join the server yourself and check that the change did what you expected: experience, drops and day length are easy to test in a few minutes. If the server does not start or ignores your values, restore your backup and compare line by line.

Keep a small changelog of your Palworld server settings in your Discord with the date, the key and the old and new values. It makes it easy to roll back when players say the game suddenly feels different, and it shows your community that the rules are consistent and deliberate. For the full and current list of keys, the official Palworld server documentation is the reference to check after each game update.

Your Palworld server, configured your way

Edit your settings from the panel, schedule restarts and backups, and add RAM as your base grows. €1 = 1GB (excl. VAT), unlimited slots, servers in Europe.

See the Palworld plans

Planning your Palworld server settings before launch

The best moment to think about Palworld server settings is before the first player joins, because the early days set the tone. Write down three decisions: how fast you want progression to feel, how punishing death should be, and how many people you realistically expect in the first month. Those three answers drive almost every key in the file, and they stop you from tweaking randomly in response to the first complaint.

Then run a short private test. Invite two or three friends, play for an evening on your chosen Palworld server settings, and note what annoyed you: too slow, too easy, too much walking, too little loot. Change only the keys connected to those complaints, and test again. After two rounds you will usually have a configuration that feels right, and you will understand why each value is where it is. That understanding is worth more than any preset, because the next game update will add options and change behaviour, and you will know how to adapt your Palworld server settings without starting from zero.

Finally, publish your rules where players can see them: the experience rate, the death rule, whether PvP is on, and the player limit. A pinned message in your Discord is enough. Players trust a server whose rules are visible, and they are far more forgiving when you need to adjust the Palworld server settings later, as long as you explain the reason and give notice before the change.

Frequently asked questions

Where is the Palworld server settings file?

It is called PalWorldSettings.ini and sits in the Pal/Saved/Config folder of your server, in a subfolder named after the platform the server runs on. On the Portallis panel you can open it from the file manager. The default template, DefaultPalWorldSettings.ini, is only a reference and is not read by the server.

Why do my Palworld server settings not apply?

The usual causes are editing the file while the server is running, editing the default template instead of PalWorldSettings.ini, or a broken OptionSettings line caused by a missing comma or bracket. Some values can also come from the world’s own save data once a world exists, so check the official documentation for your game version.

What is a good experience rate for a Palworld server?

For a small co-op group, between 1.5 and 2.0 keeps progression comfortable without making the late game arrive too fast. For a more traditional experience, stay between 1.0 and 1.5. Very high values end the fun quickly, so raise it gradually and ask your players how it feels.

How much RAM do I need for a Palworld server?

It depends on players and bases. Palworld is memory-hungry, and our plans for the game start at 6 GB. For ten or more players with several active bases, plan for more and watch how the server behaves. Because you pay for RAM rather than slots, you can add memory whenever you need it.

Can I change Palworld server settings after the world is created?

Yes, and many admins do it as the community grows. Stop the server, edit the file, restart, and test. Tell your players before you change progression or death rules, and keep a backup of the world so you can go back if a change does not work out.

Getting your Palworld server settings right

Good Palworld server settings come from a simple process: understand the file, change a few keys at a time, keep rates modest, protect your passwords and give the server enough memory for the world you are building. Start from one of the presets above, play for a week, and adjust based on what your players actually say. When you are ready to run it on a stable machine, our Palworld server page lists the plans, and you can scale the RAM as your world grows.

Table of contents

Host your server in 60 seconds

Choose your game, set your RAM and launch your server instantly.
Hosting at €1/GB of RAM (excl. VAT)